I had a handyman come by and trim a few of my interior doors because they were sticking from expansion from the humidity.
It turns out, one of the door jams is uneven, so now there is a bigger gap on one side of the top of the door that lets light through at night.
I have some weather stripping, but the gap is too big, and I would prefer to not have weather stripping there, since it gives some resistance when latching the door.
I’m not particularly handy, but I was thinking I can wood-glue a shim to the top of the door, then plane it down a bit and paint.
Does this seem like a reasonable way to go about it?
