Home Improvement Stack Exchange
Home Improvement Stack Exchange

Questions tagged [screws]

Questions relating to threaded fasteners and their use.

Screws are a threaded fastener used to join wood, metal, or other materials. Screws come in various diameters, lengths, head shapes, drive shapes, and thread pitch. Screws are made of several different materials and coatings, depending on their intended use.

More information

Wikipedia

733 questions
85
votes
13 answers

How to remove screws with stripped heads?

I have wood screws whose heads are stripped from trying to remove them with a drill. The drill (or screwdrivers) can't grip the heads anymore. What can i use to remove these screws easily?
LordHits
  • 1,005
  • 1
  • 11
  • 9
81
votes
12 answers

Is there a case where nails are better than screws, from an engineering/structural standpoint?

Is there a case where nails are better than screws, from a structural standpoint? For instance: Say you used screws instead of nails on a backyard deck, when the design specifically called for nails. Would the result be inferior? Could it fail…
Chris W. Rea
  • 1,475
  • 4
  • 15
  • 25
76
votes
7 answers

Understanding US Screw Sizes

I'm going to be building a workbench, so I've been 'screw shopping.' I need some explanation on the sizing of screws when they are advertised as (example) 6 x 3/4". I know that 3/4" is the length of the screw, but what does the 6 mean?
Calvin Allen
  • 1,079
  • 3
  • 10
  • 13
58
votes
14 answers

How to avoid stripping screw heads?

In at least two different contexts now (installing shower handrails, installing gate on fence) I've found myself stripping the head of the screw beyond all use. I must be doing something wrong, so what is it? The screws I'm driving are two or three…
Paul Price
  • 1,207
  • 3
  • 16
  • 23
45
votes
7 answers

Why are there so many different types of screws (phillps/flat/hex/star/etc)?

Newbie question. Why is it that there's a bazillion different types of screws? Why can't we just always use one standard screw type? Are there advantages/disadvantages to the different types? Are there times when one type is preferred over…
Doug T.
  • 1,377
  • 6
  • 21
  • 27
36
votes
12 answers

How much weight can screws in drywall hold?

I've always had the question of how much weight can a single screw into a drywall withstand? For instance, I would like to do things like this: It's hung with 5 screws. The whole thing weighs approximately 50kg (110 pounds) so we can say that each…
Gastón
  • 463
  • 1
  • 4
  • 7
31
votes
8 answers

How do I rehang a wooden door with worn screw holes?

I have a wood door in one of my rooms where the top screws no longer hold the hinge to the wall because the screw holes have worn loose. I have tried slightly larger screws and filling with wood toothpicks, which usually lasts about a year. I…
user2278
31
votes
10 answers

What is a NON-self-tapping screw? What does self-tapping mean, really?

Someone on the site suggested that I use "self-tapping screws", and gave me a link to the Wikipedia page about them. So, I went there, saw the definition: A self-tapping screw is a screw that can tap its own hole as it is driven into the material.…
einpoklum
  • 2,657
  • 3
  • 17
  • 37
30
votes
6 answers

Should I use nails or screws for hanging drywall on the ceiling?

I'm replacing water-damaged drywall on my ceiling and was considering using screws. Other than cost, is there any other reason I should use nails instead? Or am I too paranoid that nails won't have enough holding power? I'd prefer the cheapest…
Doresoom
  • 15,623
  • 30
  • 80
  • 118
30
votes
12 answers

How can I remove a really stuck screw?

I often come across screws that just won't budge with a manual screwdriver or even a driver bit in a drill. They are of different screw types and heads in a variety of different materials. What are some techniques I can use to try and remove them?
Tester101
  • 131,097
  • 78
  • 316
  • 608
24
votes
6 answers

What benefit do plasterboard/drywall screws have?

I have some plasterboard screws like this: However, without a drill I have a job getting them into the wall. Am I safe to use normal screws on hangings that aren't going to be taking a great deal of weight? In this case it is a rack of coat hooks.
Jivings
  • 343
  • 1
  • 2
  • 7
22
votes
2 answers

What do the numbers in screw sizes M3, M4 etc. mean?

I noticed that in some (many?) countries, screw sizes are listed as "M+number", e.g. M3, M4, M5 and so on. What does this size designation mean?
einpoklum
  • 2,657
  • 3
  • 17
  • 37
22
votes
2 answers

Will removing shelving screws from studs damage the studs?

We live in a newly built home. My husband hung some Ikea shoe bins on the wall and mounted them in to the studs. I am going to paint the hallway and would like to remove the bins and hooks, patch the holes and have an even coat of paint from floor…
Lauren
  • 221
  • 2
  • 3
21
votes
4 answers

What is the use for this different threading near the head of a large screw?

I'm inquiring about the strange threading at the base of this screw: These were used in somewhat heavy-duty outdoor construction. What is the purpose of that corkscrew, and is it safe to replace it with a similarly sized regular woodscrew? I…
DarkLightA
  • 443
  • 2
  • 4
  • 9
20
votes
7 answers

How to unscrew screws that are barely accessible?

I need to remove the face of a fake drawer that is screwed from behind. Unfortunately, a kitchen sink is preventing me from using a screwdriver. There is approximatively 4cm of space. The screw head is a PZ2. Is there a tool can could help me remove…
alecail
  • 3,146
  • 6
  • 23
  • 28
1
2 3
…
48 49